Hi all,
I have recently returned to the tool chest after sheet rocking and painting the shop. I've also added a heater, insulated the doors and added a whole bunch of lights and electrical outlets since moving in... Here are a couple quick before and after photos:
IMG_3152.jpg
IMG_3151.jpg
Before, with the bench against the wall (and the tool chest pieces stacked under the bench)
IMG_6617.jpg
IMG_6618.jpg
After: the new set up with the bench back out in the room, the tool wall moved into the corner, and rearranged machines. This set up is essentially one side of a slightly oversize two car garage and I could get a car in the other side if needed...