I found this drill in an antique store for $20 and decided I could breathe some new life into it. I soaked everything in Evapo-rust and then either painted or sanded/polished all the parts. I scraped and sanded the old damaged finish off the wood. I was hoping for rosewood but didn't get that lucky. I finished it with General Finishes antique walnut gel stain and Arm-R-Seal.
I'm really excited to put it back into service. Some before and after pictures
IMG_3297.jpg
IMG_3301.jpgIMG_3293.jpgIMG_3305.jpgIMG_3316.jpgIMG_20190614_165116.jpgIMG_20190614_165125.jpgIMG_20190614_165144.jpg