Results 1 to 9 of 9

Thread: Exterior Dental Office Sign

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Feb 2003
    Hayes, Virginia

    Exterior Dental Office Sign

    This is my latest sign project. It's a double sided rehab job basically I had to strip the existing sign down to the plywood and fabricate all new panels. Once we got started we had to replace one half of the plywood on one side, it was water damaged and de laminating. I made all of the new panels from Glacier White Dupont Corian and they were all longer than the bed of my CNC Router.

    The big problem with this job was the weather. It was so hot we had to break the install up over two days working in the early morning and late evening hours. Even so we had problems with our paper templates sticking to the plywood base because of very high humidity so it was difficult to move the templates in small increments.

    I still have to work on the copper sheet at the top of the sign. We have decided to install a plastic drip edge that will protect the plywood panels from rain damage.
    Attached Images Attached Images
    Last edited by Keith Outten; 07-03-2019 at 9:53 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts