Results 1 to 1 of 1

Thread: logic trace 2018 selecting the command lines and arcs

  1. #1

    logic trace 2018 selecting the command lines and arcs

    I traced out a diagram using lines and arcs and showed where I selected line and where i selected arc
    I even put the cut part back on the diagram that I traced for a fit test
    https://youtu.be/dift8Umz5rQ
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •