Page 3 of 3 FirstFirst 123
Results 31 to 33 of 33

Thread: looking for recommendation - trim router for routing small mortises

  1. #31
    Join Date
    Nov 2015
    Location
    Culpeper, VA, USA
    Posts
    49
    Derek,

    No. I have dust control on the plunge base on the 618, but the 600 is just free-wheeling.

    I have the DeWalt fan and I like to point it at the workpiece while Iím routing. It does a pretty good job of directing the dust and debris away from my face, but leaves me a bit of a mess to clean up. I roll up the door of the shop and blow it out when it gets too dusty.

    Cheers,
    -Fred

  2. #32
    BTW, the latest podcast of Shop Talk Live featured previous editor, Asa Christiana. I believe he wrote an article for the upcoming issue of FWW reviewing cordless trim routers. His arguments for going cordless are compelling: Don't have to worry about hitting the cord; most trim ops are not intense, so battery life is very good. Of course the balance is different from a corded...

    I am looking seriously at the Makita cordless, which uses the same bats as my other Makita cordless stuff.

    <off topic alert>
    I miss Asa. He and Ed were great on STL. They kept that podcast on topic and moving at a good pace.
    Last edited by Prashun Patel; 07-17-2019 at 9:00 AM.

  3. #33
    Join Date
    Jul 2015
    Location
    Pennsylvania
    Posts
    28
    I'm typically not a Ridgid guy, but after messing with several trim routers, i preferred the rack and pinion adjustment on the Ridgid corded trim router. No regrets after several months. No plunge base available that i'm aware of, thought that's not a concern for my uses.

    One added feature that i didn't consider until after using is the on-off switch. We all inherently use the tool, then set it on our bench bit-up. I like that the on off switch is pulled up proud of the top, and can serve to turn of the tool either by just a quick hit with my palm, or by setting the tool down on its back. The shielded rubber switches aren't bad, but the Ridgid switch is a noticeable nod to good product design that i appreciate.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •