I was routing a grove in some plywood for a drawer bottom.
It was tearing out something fierce.
I decided to try a climb cut - which I've done before with good results- - only - -on a much larger piece of plywood.
This went real well with the small 6 x 4 inch test piece I ran.
Things got real exciting real quick when I ran the 4" x 13" drawer front however......
My wife was painting in the living room when the drawer front sailed past her doing about 350 mph (thankfully she wasn't in the path of the flying piece of drawer.
Lesson learned......climb cuts are now something I'll only try again on much larger pieces....