Results 1 to 6 of 6

Thread: Suppliers for 3/8" Cross Dowel Nuts

  1. #1
    Join Date
    Oct 2007
    Location
    Coastal Southern Maine
    Posts
    152

    Suppliers for 3/8" Cross Dowel Nuts

    I'm looking for a supplier of 3/8" cross dowel nuts. So far I only find them at Lee Valley. I have tried McMaster Carr, Grainger, Woodworkers Hardware & Ebay using the terms cross dowel hardware, cross dowel nuts & barrel nuts. I find plenty of 1/4 20 nuts but nothikng in 3/8".

    Any suggestions for different search terms or different suppliers?

  2. #2
    Join Date
    May 2017
    Location
    Germany
    Posts
    360
    Woodpeckers has an 8-pack of 3/8-16 cross dowel nuts for $14.39.

    https://www.woodpeck.com/steel-cross-dowel.html

  3. #3
    Join Date
    May 2014
    Location
    Grassy Lake Alberta
    Posts
    926
    pretty sure Lee Valley carries them.

  4. #4
    Join Date
    Apr 2017
    Location
    Tucson, Arizona
    Posts
    208
    Hi Frank,
    Here is another source for 3/8 - 16 cross dowel nuts. They are $0.90 each in small quantities, around $0.64 each for larger quantities.
    David


    https://shop.stafast.com/cross-dowels/cross-dowels-with-1-hole/jcd38162613

    Stafast cross dowel nuts.jpg

  5. #5
    Join Date
    Feb 2008
    Location
    E TN, near Knoxville
    Posts
    8,058
    Amazon apparently offers a variety. I searched for cross dowel nuts 3/8" but maybe 10mm diameter would work for you.

    If I needed just a few I'd probably make some from aluminum or steel 3/8" rod.

    JKJ

    Quote Originally Posted by Frank Drackman View Post
    I'm looking for a supplier of 3/8" cross dowel nuts. So far I only find them at Lee Valley. I have tried McMaster Carr, Grainger, Woodworkers Hardware & Ebay using the terms cross dowel hardware, cross dowel nuts & barrel nuts. I find plenty of 1/4 20 nuts but nothikng in 3/8".

    Any suggestions for different search terms or different suppliers?

  6. #6
    Join Date
    Oct 2007
    Location
    Coastal Southern Maine
    Posts
    152
    That looks perfect. Thanks for the information.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •