I have purchased some cheap angle grinders, made in China from Menards and other places. Thinking when they blow up or burn up no big deal. I have an abrasive cut off wheel on on and a wire brush on another. Also have a Bosch and Ryobi fitted with flap disk and the other with a grinding wheel. I never have to swap out a disk, just pick up another one! I have Never had a Chinese one fail, runs just as well as my name brand ones.
The key with those 4x6 4x7 saws is a good bi-metal blade. Last ones were Lenox cost 3 times the Chinese ones last and cut 10x better.
Last edited by Bill George; 07-13-2019 at 8:15 AM.
Retired Guy- Central Iowa.HVAC/R , Cloudray Galvo Fiber , -Windows 10