Results 1 to 13 of 13

Thread: Finish For Jigs

  1. #1
    Join Date
    May 2008
    Location
    Peshtigo,WI
    Posts
    802

    Finish For Jigs

    I made a circle cutting jig for my new bandsaw and I'm wondering what type of finish to put on it.

    Poly or maybe BLO and wax?
    Confidence: The feeling you experience before you fully understand the situation

  2. #2
    Nothing is my preferred finish for jigs as it adds no functionality.

  3. #3
    Join Date
    Nov 2007
    Location
    NW Indiana
    Posts
    2,293
    If I want to finish a jig, I typically use Shellac . It dries very quick.

  4. #4
    Join Date
    Apr 2017
    Location
    Bucks County, PA
    Posts
    182
    I generally use nothing on jigs, or a coat of paste wax if I need it to slide easier.

  5. #5
    Join Date
    Mar 2016
    Location
    Exeter, CA
    Posts
    352
    i polly everything........its my go to finish. Obviously I'm not a purist..... Randy

  6. #6
    Quote Originally Posted by Larry Frank View Post
    If I want to finish a jig, I typically use Shellac . It dries very quick.
    +1. Same here.
    "All that is necessary for the triumph of evil is that good men do nothing."
    - Sir Edmund Burke

  7. #7
    I use wax.

  8. #8
    Join Date
    Jan 2010
    Location
    Tampa Bay, FL
    Posts
    1,902
    Shellac, but usually nothing.
    If you drive at the speed of light, do your headlights work? - Steven Wright

    If a man points at the moon, an idiot will look at the finger.

  9. #9
    Join Date
    Jun 2008
    Location
    So Cal
    Posts
    2,338
    If I make a fixture or jig that I believe is worth using sometime in the near future. I will use up whatever finish I have leftover in the bottom of a can or jar. Even if it has a hard layer on top .
    I have found the bigger fixtures are less likely to survive. Things get too warped plus I’m always hip on trying new ideas.
    Aj

  10. #10
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    48,887
    If I finish at all, it's either BLO or shellac or maybe the water borne top coat I typically use if I just happen to also be spraying in the same time frame. Most jigs are just plain naked.
    --

    The most expensive tool is the one you buy "cheaply" and often...

  11. #11
    Shellac, if not on the whole jig, then just on the area where I label it with a sharpie. Otherwise the sharpie bleeds.
    Jigs not labeled and dated have a way of masquerading as scrap in my shop.

  12. #12
    Join Date
    Feb 2003
    Location
    Griswold Connecticut
    Posts
    6,325
    I wax them if I need them to slide or rotate.
    The rare times I've "finished" one was with whatever I had in a can. Usually Arm-R-Seal, or Seal-A-Cell. Only because they are almost always in the shop on the shelf.
    "The first thing you need to know, will likely be the last thing you learn." (Unknown)

  13. #13
    Quote Originally Posted by Edwin Santos View Post
    Jigs not labeled and dated have a way of masquerading as scrap in my shop.
    So that's what they're doing. Good to know it's not my mind slipping.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •