Hi, The fountain in question is one of those pre-cast concrete three tier jobs with a bottom basin. The basin seems to have developed some hairline cracks and it is not holding water so i need to seal it in some way to make it water tight again.
There are some rubberized and epoxy products available that can be ordered. There is also Drylok which is easily available at any Home Depot. Their website literature says it stands up to 10 pounds of hydrostatic pressure, equivalent to a wall of water 22ft high. The water level in my fountain is maybe 8 or 10 inches high, so the hydrostatic pressure should be well under what they claim to withstand.
Question 1 - Is Drylok a good product for the problem I want to solve?
Question 2 - If not, does anyone have another product to recommend?
Thanks in advance,
Edwin