Results 1 to 9 of 9

Thread: DIY sawstop industrial saw mobile base?

  1. #1
    Join Date
    Dec 2005
    Location
    Tyler, TX
    Posts
    13

    DIY sawstop industrial saw mobile base?

    Has anyone seen a DIY version of the sawstop industrial saw mobile base?

    I have access to welding equipment and Iím looking for some design guidance on making a base that uses a small foot operated hydraulic jack to lift the saw up onto 4 swivel casters like the one sawstop sells, I just canít bring myself to pay almost $400 for a mobile base.


    Thanks
    Duke

  2. #2
    Join Date
    Apr 2017
    Location
    Tucson, Arizona
    Posts
    288
    Hi Duke,
    I would highly recommend the Grizzly Bear Crawl Heavy Duty Mobil Base for your application. I have one installed on my 600 lb. table saw and it works great. It has lifting jacks with foot operated levers to raise or lower it. This is a very stable unit. It is rated at 1200 lbs. For around $70, I would probably spend almost that much for the materials to build one.
    David

    https://www.grizzly.com/products/Gri...le-Base/T28000


    Grizzly Bear Crawl HD Mobile Base.jpg Grizzly 1023rlwx cast iron router table extension.jpg Grizzly Sliding Attachment 1.jpg

  3. #3
    Join Date
    Aug 2010
    Location
    Scarborough(part of Toronto|) Ontario
    Posts
    212
    The SawStop ICS base has 4 swivel casters. That's why a lot of people like it. It makes moving the saw in tight places much easier.

    Tim

  4. #4
    Join Date
    Nov 2007
    Location
    NW Indiana
    Posts
    2,311
    I have the Sawstop industrial mobile base and would gladly buy one again if needed. It is far and away the best mobile base I have ever used.

  5. #5
    Join Date
    Apr 2017
    Location
    Tucson, Arizona
    Posts
    288
    Quote Originally Posted by Tim Janssen View Post
    The SawStop ICS base has 4 swivel casters. That's why a lot of people like it. It makes moving the saw in tight places much easier.

    Tim
    Hi Tim and Larry,
    The Grizzly has 2 swivel casters and 2 fixed, which could probably be changed out for swivels for around $20 or so. I am not knocking the Saw Stop - I'm sure it is first rate. Duke indicated that he is on a budget and wanted to build something to mimic the Saw Stop. I offered him an alternative route. So for less than 1/4 of the price of the Saw Stop - this may be a viable alternative for him. Thanks for your input.
    David

  6. #6
    Join Date
    Dec 2005
    Location
    Tyler, TX
    Posts
    13
    David, itís funny you should mention the bear crawl base, as I have already ordered one and will probably use it for the sawstop.

    The advantage of the sawstop is the 4 swivel as mentioned.

    I have to admit, I like to tinker with equipment as much as I like to woodwork so the idea of making something like the sawstop base appeals to me.

    Iím pretty sure Iím not the only one as I did find at least one video on YouTube where someone built a base with small bottle jack to lift 2 of the wheels.

    Once I put the saw on the bear crawl, I may decide it works fine and abandon this project but Iíd still be interested in seeing how someone else worked it out if they have.

    Duke

  7. #7
    Join Date
    Nov 2007
    Location
    NW Indiana
    Posts
    2,311
    If you enjoy tinkering, that is great. I would rather spend the time making sawdust. I need to move my Sawstop PCS to make room for using other tools. The Sawstop industrial base makes it so easy even for this older woodworker.

  8. #8
    Join Date
    Apr 2017
    Location
    Tucson, Arizona
    Posts
    288
    Quote Originally Posted by Larry Frank View Post
    If you enjoy tinkering, that is great. I would rather spend the time making sawdust. I need to move my Sawstop PCS to make room for using other tools. The Sawstop industrial base makes it so easy even for this older woodworker.
    Hi Larry,
    There's really no need to "tinker" - the Grizzly Bear Craw mobile base works great as is - right out of the box. I understand that the SawStop folks are really proud of their stuff. If I was buying a new SawStop then I would probably end up buying their mobile base as well. It looks like good stuff. But at around $400 vs under $100 for the alternative, then perhaps I would consider my budget as well. A guy could buy some really nice saw blades with that extra $300.
    David

  9. #9
    Join Date
    Oct 2008
    Location
    Kapolei Hawaii
    Posts
    2,929
    I really like 4 casters. Moving a 52" saw around gets real hard if you have to move the saw in the other directions that a straight caster won't allow. A smaller saw, I say it's not THAT critical.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •