I made a pair of these white oak cabinets to be used as nightstands. The design is a near copy of Stickley cabinet #1026. I got the approximate dimensions by scaling the photo on their website. One small change I made was to taper the leg width from 1 1/4" at the top to 1 5/8" at the bottom.
Left.jpg Right.jpg LeftB.jpg RightC.jpg Side.jpg
The finish is based on Homestead Finishing's Mission Oak Finish guide.
- one coat of BLO, instead of the suggested stain
- one coat of General Finishes Seal-A-Cell Clear
- scuff sand
- apply General Finishes American Oak Gel Stain, then wipe clean
- wipe on poly, instead of the suggested ArmRSeal