I purchased Blum 71B3750 110 Degree CLIP Top BLUMOTION Hinge, Soft-Close, Inset, Screw-on hinges for my current cabinet with the Blum 173H7100 0mm Cam Adjustable Baseplate, Screw-on. I am now ready to mount them on my door.
I have been to the Blum site and cannot determine the needed dimensions for the center of the cup hole from the door edge. The Blum calculation sheet does not seem to work for me. They will be mounted on a frameless cabinet. The doors will be inset and are 19 mm thick as are the cabinet sides. I would like the reveal as shown on the diagram below to be 4 mm.
hingemount.jpg
What is the dimension from the edge of the door to the center of the cup hole?