Results 1 to 5 of 5

Thread: Mobile Multifunction Table and Cart

  1. #1
    Join Date
    Apr 2009
    Location
    Palm Springs, CA
    Posts
    870

    Mobile Multifunction Table and Cart

    I normally like to design and build my own shop tables and carts. However, I found a design online that just looked so well done that I couldn't resist buying a set of plans. The plans came from Benchworks in Belgium ( I have no affiliation with them) and were very inexpensive and well done. It really fit my needs since I've been using Tanos Systainers more in organizing my tools.

    The pdf and Sketchup models were excellent and the project was a real fun build. I have come to see the value of an MFT type of table for many uses and wanted to make a smaller portable version that I can bring through doorways and roll around for some remodeling projects. This cart will be very handy for those tasks. The top has a square grid array of 20mm holes on 96mm centers for clamps and dogs.

    The dimensions were in mm but the cut lists were sized to imperial sheet good sizes. The build was surprisingly easy and went together well. I did make a few minor modifications such as a 3/4" thick top since the designer was originally trying to minimize weight for portability which wasn't a big driver for my case.

    IMG_3817ec.jpg

    IMG_3820ec.jpg

    IMG_3823ec.jpg

    IMG_3825ec.jpg

    IMG_3790e.jpg

    What I really liked was the carefully thought out design that allows material to be clamped to the top as well as all of the sides. The domino mortises serve as clamping mortises as well as material supports by simply placing a few lose tenons in them. Round holes and dowels can just as easily be used instead of the domino mortises if desired.
    Last edited by Dick Mahany; 06-04-2019 at 11:07 AM.
    Dick Mahany.

  2. #2
    Interesting idea. Thanks for posting Dick!
    "All that is necessary for the triumph of evil is that good men do nothing."
    - Sir Edmund Burke

  3. #3
    Join Date
    Jun 2016
    Location
    Houston
    Posts
    123
    Nice set up. Is the grey and blue cabinet for the systainers something you bought or built?

  4. #4
    Join Date
    Apr 2009
    Location
    Palm Springs, CA
    Posts
    870
    Quote Originally Posted by Todd Zucker View Post
    Nice set up. Is the grey and blue cabinet for the systainers something you bought or built?
    The blue and gray cabinet was built from 1/2" plywood per the Benchworks plans. I used push to open slides for the shelves which keep the systainers from sliding out when tilted to roll.
    Dick Mahany.

  5. #5
    Join Date
    Mar 2003
    Location
    Upland CA
    Posts
    4,233
    Great setup, Dick.

    Looks perfect for your new smaller shop.
    Rick Potter

    DIY journeyman,
    FWW wannabe.
    AKA Village Idiot.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •