Garage sale this morning...
Disston backsaw. messy.JPG
Hmmmm...plate is 5" x 28". Spine has a Disston etch, label screw is a Disston
Disston backsaw, 2.JPG
Handle does have "issues" may either repair the lower part of the handle, or, just replace it...
Gave the plate a bath in PBBlaster
Disston Backsaw, soaking.JPG
Then used an 1-1/2" wide Defiance chisel to scrape the gunk off....started to saw an etch on the plate....
Made expressly for...
GOODELL PRATT COMPANY
Toolsmiths
GREENFIELD MA USA
Toolsmith? Plate is straight as can be. Handle seems to be the only problem...except..
Disston Backsaw, notched.JPG
For a small notch at the toe.....
I may have a 4 bolt handle I can switch out...
We'll see....teeth seem to be fairly sharp, nothing missing.
Stay tuned..