Results 1 to 4 of 4

Thread: Engraving Baseballs

  1. #1

    Engraving Baseballs

    Hello and thank you in advance. Does anyone know of a good setting for engraving baseballs? I have a 45W Epilog Helix. I used the setting for leather, but wasn't real happy.
    Thank you
    Tim Baude
    Legends Awards & Custom Engraving
    Epilog Helix 24, 45w, CorelDRAW X4

  2. #2
    explain 'wasn't real happy'. Too burnt? Not enough burn? Not enough color change? Too deep?

    All lasers are different so it's pretty much trial and error... But with leather, as with most items I stick under the beam, I find quite often that less is more. I engrave leather motorcycle seat covers, lots of Padfolio's and other leather covers that hold notepads and such. Normally I have the best luck engraving leather at or around the same power/speed settings as I use on black/white Rowmark, but with the resolution settings cranked down, I rarely do leather at more than 300 dpi, and never more than 400. Leather is very forgiving as to detail, and too much beam overlap can be counterproductive, random overburnt spots and banding in an otherwise nice engraving will have you gnashing your teeth...

    some leather can take a lot of power and handle deep engraving, some can't. Baseballs, being thinnish bright white leather I would try very low power- with your 45 watts, try 20-25%, about 80% speed, 300 res both directions and work up- or down, from there... seems it would be pretty easy to overcook baseball leather. Never done one...

    another thing I do that helps, is to turn whatever I'm engraving into a 200dpi bitmap and engrave it as a photo. Even text. If your Helix will do automatic halftone/grayscale engraving, make your text/graphics 80% gray. The dithering to create grayscale causes the beams pulses to break up which reduces beam overlap a ton...



    .
    Last edited by Kev Williams; 05-22-2019 at 11:21 PM.
    ========================================
    ELEVEN - rotary cutter tool machines
    FOUR - CO2 lasers
    THREE - fiber lasers
    ONE - vinyl cutter
    CASmate, Corel, Gravostyle


  3. #3
    As Kev says, the leather is thin. The horse hide on baseballs will crack very easily under the heat of a laser. I just don't do them feeling that it is a "no win" situation.
    Mike Null

    St. Louis Laser, Inc.

    Trotec Speedy 300, 80 watt
    Woodworking shop CLTT and Laser Sublimation
    Evolis Card Printer
    CorelDraw X5

  4. #4
    Join Date
    Mar 2008
    Location
    Murphy NC
    Posts
    520
    Change your black to 80% as Kev noted and you'll have better results.
    Epilog Legend 36EXT ~35W
    30W Fiber Laser
    Corel X6
    AutoCAD 2019
    FFL 01
    Some Patience

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •