Page 2 of 2 FirstFirst 12
Results 16 to 18 of 18

Thread: would an Echo CS590 be able to be used as a chainsaw mill?

  1. #16
    Join Date
    Dec 2010
    Location
    WNY
    Posts
    9,702
    If no one could see pictures posted by someone then the problem is at the end with the person who posted them. But if most people can see pictures you can't then I think the problem is more likely at your end.

    John

  2. #17
    Join Date
    Dec 2016
    Location
    South West Ontario
    Posts
    1,503
    Have the same set up with the same Husky. Think my bar is longer though. Getting the first cut flat was the biggest challenge, after that not so bad. Did a 4.5ft diameter log in two passes but not great, ended up cutting it in half.
    ​You can do a lot with very little! You can do a little more with a lot!

  3. #18
    Join Date
    Feb 2003
    Location
    Hayes, Virginia
    Posts
    14,772
    Members can see pictures that are linked from other web sites.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •