Results 1 to 10 of 10

Thread: Measure twice and screw it up anyway

  1. #1
    Join Date
    Apr 2017
    Location
    Michigan
    Posts
    633

    Measure twice and screw it up anyway

    Making a drawer front 41" x 3" x 1" and absent mindedly cut it 3" too short,,,,rats. The fix is surprisingly easy, I just glued the offcut back on. Endgrain gluing is surprisingly strong and invisible. I may add something to reinforce it but it really is not needed.

    Sometimes I enjoy making corrections. It counteracts my incompetence with a wiff of competence.

  2. #2
    Join Date
    Sep 2007
    Location
    Longview WA
    Posts
    19,122
    Blog Entries
    1
    Quote Originally Posted by Tom Bender View Post
    Making a drawer front 41" x 3" x 1" and absent mindedly cut it 3" too short,,,,rats. The fix is surprisingly easy, I just glued the offcut back on. Endgrain gluing is surprisingly strong and invisible. I may add something to reinforce it but it really is not needed.

    Sometimes I enjoy making corrections. It counteracts my incompetence with a wiff of competence.
    Measuring errors is one of my reasons for switching from using tape measures and rulers to using a story stick. No addition or marking the half inch on the wrong side of the inch.

    Those of us with a touch of dyslexia can have real problems with measuring devices.

    jtk
    Last edited by Jim Koepke; 05-14-2019 at 6:53 PM. Reason: dyslexia
    "A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
    - Sir Winston Churchill (1874-1965)

  3. #3
    Join Date
    Dec 2012
    Location
    Columbus, IN
    Posts
    28
    Been there, done that, lol, even the fix

  4. #4
    Join Date
    Jun 2010
    Location
    twomiles from the "peak of Ohio
    Posts
    7,428
    Hmmm, doesn't Lee Valley sell Board Stretchers?

  5. #5
    Join Date
    Dec 2015
    Location
    Cincinnati, Ohio - north
    Posts
    67
    Quote Originally Posted by steven c newman View Post
    Hmmm, doesn't Lee Valley sell Board Stretchers?
    Only during their April 1 "Lirpa Loof" sale day.

  6. #6
    Quote Originally Posted by steven c newman View Post
    Hmmm, doesn't Lee Valley sell Board Stretchers?
    I know this is the hand tool forum but sometimes a corded tool is what you need. Board stretcher
    Lee Schierer
    USNA- '71
    Captain USN(Ret)

    My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute

  7. You are not alone.

    "What's going on? I cut it twice and it is still too short."

  8. #8
    Join Date
    Sep 2007
    Location
    Longview WA
    Posts
    19,122
    Blog Entries
    1
    If you have a 1X12 and need a longer 1X6 it is possible to cut the 1X12 diagonally and then reorient the pieces and join them along the diagonal to make a longer piece.

    There are other ways of to do this depending on how long you want to make it.

    jtk
    "A pessimist sees the difficulty in every opportunity; an optimist sees the opportunity in every difficulty."
    - Sir Winston Churchill (1874-1965)

  9. #9
    Join Date
    Nov 2017
    Location
    Winston Salem, NC
    Posts
    78
    I'll never forget the time I realized that 5'5" and 55" were not interchangable . . . .

  10. #10
    Join Date
    May 2019
    Location
    White Lake, Michigan
    Posts
    14
    Oof. I've never done end grain gluing. I never will.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •