Results 1 to 3 of 3

Thread: Laminating birch to ash, yellow glue?

  1. #1
    Join Date
    Mar 2004
    Location
    Cockeysville, Md
    Posts
    1,757

    Laminating birch to ash, yellow glue?

    I'm gluing 3/8 curly birch to 1" ash, the parts are approximately 6" wide by 13" long. Will Titebond 2 be a good choice?

    Thanks
    Brian
    The significant problems we encounter cannot be solved at the same level of thinking we were at when we created them.

    The penalty for inaccuracy is more work

  2. #2
    Join Date
    Apr 2017
    Location
    Michigan
    Posts
    854
    Assuming no crossgrain issues, and normal loads, you could use almost any glue without problems. Any of the Titebond glues will be fine.

  3. #3
    Join Date
    May 2018
    Location
    British Columbia, Canada
    Posts
    16
    Hi Brian,

    Everything described simply as "wood glue" is polyvinyl acetate (PVA) in various formulations. When used appropriately, wood joined with PVA glue can be more difficult to tear apart than the solid wood itself.

    PVA glues may have different colours, open times (the time it takes for the glue to set or become firm), and resistance to breakdown in wet conditions. Titebond II, for example, is moderately water resistant, yellow in colour, with modest open time. Titebond III is more water resistant, with more open time, and is brown in colour.

    All else being equal, my default glue is Titebond III because I appreciate the additional few extra minutes of open time versus most other PVA glues. However, you may find that Titebond II is a more discreet colour choice when bonding birch and ash. I keep both Titebond II and Titebond III in my shop, because of these differences.

    As to your original question: Titebond II would be a fine choice for your application.

    Regards,
    Ryan

    *Edited for formatting

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •