I have a small leak. I tightened up the bolts and it is reduced, but it still leaks a bit; perhaps a couple drops a week.
When I changed the oil the first time I had trouble adding oil through the plug until it reached the plug. Someone (I don't recall who) suggested removing a cap screw from the top and adding oil there until it came out the plug. That was pretty easy.
Now I want to add some oil because of the leak. It would be an awful lot easier to add oil though the cap screw until it reaches the right level from the top instead of taking it apart to get at the fill plug. Foolishly I didn't measure the level.
If anyone has done this (or is willing to measure their level) how far from the top is the proper level?
I hope this makes sense!