Results 1 to 6 of 6

Thread: Spalted Maple Valet

  1. #1

    Spalted Maple Valet

    I found this 5/4 8" board at Farnsworth Lumber a couple months back. They threw it in the solar kiln for me and got it pretty dry so I started using it to make this valet last week. It's a continuous grain box with a drawer below (still working on that). The top is separated so there's a place for a phone.

    I was pretty happy with it when I was dry fitting it, but after glue up some slight gaps in the dovetails appeared and it went out of square by about 1/32". Not a huge deal but just annoying. Any sage advice for preventing these sort of problems? The dovetails were super tight before glue.

  2. #2
    Join Date
    Mar 2015
    SE Michigan
    Beautiful piece, Dave. When it comes to joinery, it seems a bit Murphy’s law to me. I would have thought the glue would swell the joint and make it tighter...not more gaps. The only thing I can think of is that it racked slightly (as you indicated) and caused some open gaps in the dovetails (?). It’s such a nice piece of wood, after it’s finished I doubt anyone will be noticing the joints. By the way, what’s the overall dimensions?

  3. #3
    I could be wrong but I'm sure that wood is Ambrosia Maple ... not spalted...

  4. #4
    Join Date
    Mar 2003
    SE PA - Central Bucks County
    Quote Originally Posted by Barry McFadden View Post
    I could be wrong but I'm sure that wood is Ambrosia Maple ... not spalted...
    You are correct. Ambrosia Maple.

    OP, very nice work!!!

    The most expensive tool is the one you buy "cheaply" and often...

  5. #5
    Join Date
    Sep 2013
    Carrollton, Georgia
    Nice colorful valet.

    Folks around here call that Ambrosia maple and, for some reason, it sells for high dollar.

  6. #6
    Very nice! They call it wormy maple here and itís cheap. About $3lbft. I made a headboard out of some. Nice to work with.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts