Yes all I want is insert replacements on the double hungs and new patio door and bay window. I am just so confused with all these brands and not know if one is better than another seems to be a crap shoot. i am trying to gather information and also questions to ask these dealers as I go through them. Reading reviews on sites is nice but not all reviews are from your area so different contractors and dealers. Oh the agony.
John T.
I’ve heard many times that it’s more important to get a good quality installer. When I went through this last year, I researched the installers first, then went with a window recommendation from them.
Just a side note...Block and tackle mechanism rely on springs to counter balance the weight of the sash.
Be careful of what sales people put out there. If you have anything that hits you as questionable Google is your friend for great explanations on technical jargon they may throw at you.
BandT 1.jpgBandT 2.jpg
I built my house new in '81, using casement windows. Forgot the brand, but replaced them after 15 or 16 years with Pella casement, clad, and need to put new ones in again now. Ordered sliding windows this time, as you can get them in the same sizes as casement. Brand I bought this time is Jeld_Wen, ordered them during the crazy days sale at Menards. 17% off sale. I am using windows with flanges, so they an be fastened in from the outside, and use the wide sealing tape. I will have to re trim, and remove some siding to put them in, will be installing smart trim around them this time, with screws so the trim can be removed and pull the window out to replace them the next time. NO windows are worth big money, IMHO they are all made with a 15 year life span.
John,
I just wanted to point out that all window balances that I'm aware of use a spring of some type just in different ways so for a sales person to say that there are no springs involved in the balance system is a fallacy. You can find debate on all issues of things when it comes to buying windows from glass type with coatings to what surface the coating is on to the type of balances used to the material the window is made of, vinyl, wood, composite....all these factors and more are what drives the cost of a window. Personal experience in my own home, I bought and installed wood windows with aluminum exterior cladding 25 years ago from a manufacturer that is now defunct. In that time I have had to replace two glass panel units due to failed seals and balances on two of the 16 windows that I installed due to failure of the balance not being sized correctly for the weight of the sashes. These windows are showing their age as the exterior glass surfaces are getting harder to clean due to weather exposure and the paint surfaces of the aluminum cladding are, like all exterior painted surfaces, getting bad. It is a daunting task trying to make heads or tails of the information but it is not unlike making any large purchase, it shouldn't be a crap shoot. Research the jargon that the sales people use, like "our windows have LowE glass", to help you compare apples to apples and make an informed decision. Read personal reviews but don't rely on them totally since you can't tell which ones have been bought and paid for. Good luck, I'll probably find myself in the same boat in the next couple years and hopefully remember what I wrote here today.
Yes Rich he never said it did not have springs, he just said it used a block and tackle system which you find on higer end windows. I have springs on mine and my parents had those spiral springs that just did not hold well. Never remembered the name of those windows but they were construction grade and had glass failures.
It is daunting to say the least but I need to get this done as I try to complete my house and a couple years with upgrades. Never bought windows before so this is all new. But when done I am sure to have more knowledge than what I started with for sure.
John T.
We bought 12 30x60" Xact brand windows on sale for about $150 a piece from our local lumberyard 14 years ago when we were repairing the old farmhouse here and they have done fine, they are double hung and low E glass and came with built in J channel for vinyl siding and we have had no problems with them yet. I have bought various other windows over the years from the same place and they have all been good. I would not personally want to spend a lot of money on windows, but I am a cheapskate and always have been. I always get new construction windows, they do seal better with the nailing flange all the way around and are easy to install.
Zach
I would find some one that has their windows and see if they are happy. You are going to spend a lot of money doing the job. If they will not provide you with references, I would probably look around.
There is a reason Anderson windows are expensive, go look at them and then at the windows you are considering.
I did just that Friday and was not impressed. The match up was with their 400 series. The thing that scares me with clad windows is I have heard stories about them peeling. I do have references and did drive by the houses and was hoping to see someone out side to stop and ask. I will drive by a few more times. Sunrise windows Restoration series is a nice window and the doors are also. Still doing some homework but leaning more and more toward them because so far Marvin, Anderson and Renewal by Anderson are more expensive and I am not seeing more value for my dollar. There are bad reviews in all aspects of construction but how they stand behind them is key.
John T.
Here's the thing with clad windows-
They don't last forever but they are maintenance free up to the point where they fail. They will last 20 - 30 years. I am now replacing my Andersen clad windows right at 30 years. It's a pain but at the same time it was great not having to paint them ever since we built our house 30 years ago.
You can absolutely buy windows that will last potentially forever but they will be made out of wood or today, a composite, but either way they will require regular maintenance, ie painting every 3 years or so. Clad windows are not about lasting forever. They are about being maintenance free- until the vinyl fails and they have to be replaced.
Choose your poison. As a carpenter here in New England I have seen and worked on windows over a hundred years old. Many in beautiful shape because they have been maintained meticulously over the decades. But today they are often casually replaced because they are single pane and obviously not efficient. Very sad to watch a window that I know was built on site from scratch by master craftsmen just be ripped out and sent on it's way to the dump. A storm window could prevent that but time marches on.
Anyhoo, the point is no more complicated then the classic, pay me now or pay me later. If you want windows that will last forever, maintain (paint) them regularly. Or buy clad windows, live a maintenance free life and let others deal with replacing them after you're gone.
Now that I review this rambling of mine, clad windows might just very well be the proverbial free lunch!*
*as long as you die before the windows.
Realistically, technology will likely continue to improve going forward that replacing outdated windows will make sense for some time.