I’ve removed and pulled my fair share of pulleys over the years but I’m stumped on this one. The bandsaw is a 1980’s Vintage Centauro 600 CO, and to remove the motor the pulley needs to come off first.
Problem is, I can’t find a set screw that would lock the pulley to the key. I’ve looked everywhere about 6 times. Peeking on the motor side you. An see the shaft and the key/keyway. But no where is a hole for a setscrew, either on the inside part of the pulley or through the belt area. I tried pulling off the pulley with my big puller but didn’t want to force it and break something.
Any ideas? Just hit it with PB Blaster for a while and try to pull again?
Reply With Quote