Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: Jessem Doweling jig

  1. #1
    Join Date
    Mar 2003
    Location
    Upland CA
    Posts
    5,547

    Jessem Doweling jig

    I have been on the fence for a couple years about getting a high quality doweling jig. Tonight I opened an e-mail from Infinity Tools, offering a 15% discount on most items because I am a previous customer.

    It was only good for two days and was a day and a half old when I opened it. Time to act. I just ordered a Jessem 8350(?) jig master kit, which includes all the accessories for 1/4, 3/8, and 1/2" dowels. Their regular price was $199, as opposed to Amazon's price of $229, and that was before the 15% discount.

    I got the jig, 350 dowels in various sizes, and Milescraft's new safety push block which looks pretty decent. Total was $199 with free shipping included.

    I didn't put this under deals and discounts, as the sale will be over before anyone reads it. Sorry about that.

    Time to do my happy dance and go to bed.
    Rick Potter

    DIY journeyman,
    FWW wannabe.
    AKA Village Idiot.

  2. #2
    Rick,

    That's a very nice jig. I purchased the master kit last year and use it mainly for drill the hole in a cheese slicer board for the slicer. I also used it once for a small slab glue up. It was spot on.

    Enjoy,

    Bill

  3. #3
    Join Date
    Dec 2012
    Location
    Bedford, NH
    Posts
    1,286
    Great buy! Can't go wrong with that jig. I really like my Jessem Jig. It's a quality tool, easy to use, and accurately positions the dowel holes.
    Thoughts entering one's mind need not exit one's mouth!
    As I age my memory fades .... and that's a load off my mind!

    "We Live In The Land Of The Free, Only Because Of The Brave"
    “The problems we face today are there because the people who work for a living are outnumbered by those who vote for a living."
    "
    Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill

  4. #4
    You won't be disappointed. It's an excellent piece of kit. The adjustable fence that allows you to change offset without unclamping is very clever.
    If you adopt dowel joinery as a go-to method of joining two pieces of wood, you will find yourself reaching for the Jessem all the time.
    Even when I am doing a glue up and simply want to keep the pieces from sliding around, I will often just grab the jig and throw a couple of 1/4" dowels in to keep my pieces registered exactly.

    If you check out Jessem's instruction video on YouTube, you will see their method of multiple rows of staggered dowels in a leg/apron joint. It is quick to do and I believe that joint to be very strong indeed.

    Edwin

  5. #5
    Join Date
    Feb 2003
    Location
    Leesville, SC
    Posts
    2,378
    Congratulations on your new dowel jig. I have that same kit and it works great for me. I have not used any 1/4" or 1/2" dowels yet but I have them on hand. I have used dowels on my last 6 projects and they work great.jessem dowel jig.jpg
    Army Veteran 1968 - 1970
    I Support the Second Amendment of the US Constitution

  6. #6
    Join Date
    Sep 2016
    Location
    Central Missouri, U.S.
    Posts
    1,263
    I have the Jessem and love it. The one thing I would change (and did) is the drill collars they provide. They use a set screw, which must be tightened against a flat part of the drill bit. Lee Valley sells a set of collars that tighten the whole collar around the bit, which is easier and, I think, more secure.

  7. #7
    Join Date
    Mar 2003
    Location
    Upland CA
    Posts
    5,547
    Good tip, Nick. I will look into those.
    Rick Potter

    DIY journeyman,
    FWW wannabe.
    AKA Village Idiot.

  8. #8
    Join Date
    Dec 2010
    Location
    Evanston, IL
    Posts
    1,424
    Congrats, Rick, on your purchase. I have the Jessem 3/8" setup and like it a lot. I used a DowelMax for a number of years and still can't decide which one I prefer.

    Thank you, Nick, for the idea of using the Lee Valley collars. Having to find the flat spot of the bit while it is hidden under the collar is a small inconvenience that would be nice to eliminate. I bought a set of the Lee Valley collars some time ago. I need to see if that set includes a 3/8".

  9. #9
    Join Date
    Sep 2016
    Location
    Central Missouri, U.S.
    Posts
    1,263
    Yup, Jon, 3/8" and 1/2" are included.

  10. #10
    Changing out to the split collars was very good advice, thanks Nick. I had some from LV sitting in a drawer. Tried it out yesterday when using the jig for some 3/8" doweling.
    Don't know why it never occurred to me to use them in lieu of the Jessem supplied collar but definitely a big improvement.

  11. #11
    Join Date
    Dec 2010
    Location
    Evanston, IL
    Posts
    1,424
    Nick, I checked mine when I was at my shop the other day. Turns out I bought the metric set (probably to do shelf pin holes). I bet one will still work with my 3/8" bit. I'll try next time I use my Jessem jig.

  12. #12
    Join Date
    Sep 2016
    Location
    Central Missouri, U.S.
    Posts
    1,263
    The best thing about the LV collars, for me, is that they're easier to adjust for depth. I recently finished a hall table with spindly legs. The dowel holes had to be deep enough to cover the dowels, of course, but no deeper than that or they'd interfere with dowels in the adjacent joint. The LV collars make it easier to be exact.

    Anyway, glad to be of help. I've certainly taken my share of know-how from you people.

  13. #13
    Nick,

    Thanks for the insight on the drill bit collars. I'm going to order a set of them. That's the first time I've seen those. For $ 10.00 bucks you can't wrong.

    Bill

  14. #14
    Join Date
    Mar 2003
    Location
    Upland CA
    Posts
    5,547
    The jig arrived at my door today. It is a thing of beauty, and I can hardly wait to try it. I wish I had known about the split collars for it when I ordered, Infinity has them also, and I could have gotten them at the same time.

    I will wait until I get an order big enough for free shipping.

    I had to take the package out in the back of the yard to open, as there was a California tag on the box that said it contained items with chromium, that could cause cancer and reproductive problems.

    I promise I will not chew on the chrome plated parts while smoking my State approved Weed.
    Last edited by Rick Potter; 04-28-2019 at 4:37 AM.
    Rick Potter

    DIY journeyman,
    FWW wannabe.
    AKA Village Idiot.

  15. #15
    Join Date
    Jun 2003
    Location
    Northern Michigan
    Posts
    490
    The DowelMax collars they supply for their bits have 2 set screws and have held well for me over years of use. Have a set of LV collars that I have never used. Will look at those to see how they are made.

    Oh and I guess I need to stop licking chrome bumpers at the auto shows!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •