Hello-
Just getting started turning. I turned one small bowl by gluing a block to the bottom of the bowl with a piece of paper bag between the block and the bow. Glue on both pieces. This worked fine on my first bow. Next time I had rounded the outside and was starting to hollow out the bowl when the glue up failed and the 'not a bowl yet' rolled onto the floor. The glue held the paper on each piece so I guess I could say the paper failed? I suspect not enough glue to soak the paper or perhaps either the bowl blank or the black were not perfectly flat.
All stand by and wait for an actual informed opinion!
Thanks in advance
ScottIMG_4807.jpg