So I just bought a Delta 37-315 Jointer without a fence. The fence carriage is there, but nothing beyond that point.
I think the fence on the Grizzly G0490 will work in its place if the shaft that connects the carriage to swivel (tilt assembly) attaches to the carriage. The Delta shaft has holes 6'' on center and is 3/4'' in diameter. I'm not sure if it has a variation at the connection point because I don't actually have a shaft. I can possibly make or have a shaft made if the Grizzly swivel fits between the connector brackets on the delta carriage.
Can anyone give me dimensions of the Grizzly shaft and width of the swivel?
Or, better yet, anyone Have a fence assembly for the 37-315 and need a useful place to put it?
Disregard the red arrows on the green grizzly fence. The assemblies appear similar. Looks like the swivel on the grizzly may be wider than the delta, or the grizzly carriage could be narrower.
o6nr9ve.jpg
12376-B.jpg