Results 1 to 8 of 8

Thread: Router table insert plate

  1. #1

    Router table insert plate

    It's a no brainier if I'm willing to pay $60-$80. Rockler and MLCS are more cost effective but are they OK for occasional use. Which is the best cheapest? I have a Router Boss and I still need a more conventional router table occasionally.

  2. #2
    Join Date
    Nov 2006
    Location
    N.E. Ohio
    Posts
    5,531
    I simply just bit the bullet and sprang for a Woodpeckers and a full set of Woodpeckers inserts & the MDF template to enlarge the opening in my Rockler #1 router table..
    http://www.carbideprocessors.com/woo...-bosch-dewalt/

    I believe Tom and crew @ CP still offer a 10% discount to SMC members.

    Yeah it's more than Rockler & MCLS - and a bunch of others - - but - - man oh man is it ever so sweet to run stock across the table and not have it hit a "speed bump" and hang up (like my Rockler plate did).
    My granddad always said, :As one door closes, another opens".
    Wonderful man, terrible cabinet maker...

  3. #3
    You could order the plate for the Grizzly router table (part PT10432047). It's phenolic and not predrilled, but it's also only $17.19

  4. #4
    Join Date
    Dec 2005
    Location
    West Lafayette, IN
    Posts
    5,015
    Iíve had a couple of Jesse plates over the years and have been happy with them.

  5. #5
    I've had a JessEm MasterLift for close to 9 years. Worth every penny I spent on it. I just bought the MasterLift II and all the inserts as an upgrade. Man is it sweet with some major improvements.

    Now I'm tempted to order the variable speed Pow-R-Tek Router with remote control box...

  6. #6
    Join Date
    Apr 2008
    Location
    East Virginia
    Posts
    661
    Just went through this, myself. I ended up buying a piece of 1/4" aluminum from the local welding shop, cut it to fit on TS, cut a 3-1/2" hole in it with a hole saw on drill press, and used that for the router plate. To get it flush with the router table surface, I mixed some aluminum powder with epoxy, put a dollop on each corner, then filed to height. For the ZCI inserts, I cut out several circular pieces of 3/8" polycarbonate on bandsaw, and used the router table to rout a rabbet around the perimeter of those. Took a bit of fiddling, but I need to learn to use the router table anyway!
    Last edited by Jacob Reverb; 04-12-2019 at 11:27 AM.

  7. #7
    Join Date
    Sep 2009
    Location
    Putney, Vermont
    Posts
    640
    I got a nice black anodized aluminum plate from peach tree for about 50.00 a few years ago. It had the leveling screws and was flat.

  8. #8
    Join Date
    Feb 2009
    Location
    San Diego, CA
    Posts
    106
    This is one area that you may not want to save money.
    Epilog Mini 24-45W, Corel Draw X6, Photoshop CS5, Multi Cam CNC

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •