Need to make a pair of Shaker end tables for a daughter. Found my cherry, tidied up a bit. Started with the tops. The top is 18” square, I cut two lengths 18 1/4” from the board and put a straight edge on one side with my #7. After that I cut the peice in half and glued up the halves. Easier to get a straight edge with the longer peice.
Some cupping but it’s too thick at 1” and needs reducing to 5/8” eventually.

8774393B-0DDE-4510-8A5F-2D6D442A6239.jpg2DF406C2-BD2F-40C0-A902-2B1D336A9206.jpg

6D2479EF-353D-4662-8A40-1F899493FFF8.jpg