My Laguna REVO 18/36 very frequently becomes totally inoperable when turning, and I turn it off to briefly inspect my work(off with the on/off switch not with the emergency stop). The power to the control panel remains on with the rpm light still on. You can even spin the bowl by hand and the rpm meter works. I have to unplug the the lathe for a minute or so and then turn the lathe back on, then it works.
When you push the off switch, you can tell the motor is off because a large 17" bowl freely spins on and on. Free wheeling like a flywheel.
I have had the lathe nearly 3 years and use it about 4 or five days a week with heavy use.
Could it be the DELTA electronic box?
Any comments? I will contact Laguna.
Thanks for your comments.