John, here’s the slider for the table;
And the sliding arm;
John, here’s the slider for the table;
And the sliding arm;
Bumbling forward into the unknown.
Wow, congrats Brian. Looks very refined and adjustable!
I'm headed down to West Orange in a little while....hope it's warming up down there.
B
https://shorturl.at/mRTU3
Thanks for the added photos Brian. I never knew there was such a saw like that. That thing is built like a battleship, yet looks very high precision. I wonder who the mad hatter was who did the original design, which likely preceded CAD?
It looks like the saw was never used. Absolutely pristine.
John
Wowser! That is one impressive machine! I have never seen one or photographs of one before but even the photos scream "QUALITY"! Congratulations! May it serve you well!
Ken
So much to learn, so little time.....
Nice saw. An acquaintance of mine has one, the only other I have seen.
I note the "Masterpiece Machines" sticker on yours. They were importing for a while back in the 80's. I seem to remember the business disappeared in a cloud of lost deposits.
How easy is it to remove the crosscut fence for ripping?
couldn't help noticing the washers on the bolts underneath the ULMIA label . . . . I am sure Patrick Walsh will notice those too - seems like someone was discussing those just a few days ago.
Excellent find Brian.
I had one a few years back. I bought it to sell not to keep. It was set up for miter work only, no ripfence of additional crosscut table. It seems that they were quite popular for picture framers. The sliding top is great for mitres and joinery. Ulmia made a lot of different models beside this one. Up to a panel saw size. I really don't have any experience with it, i only cleaned it, checked it over and played with it for a bit. then sold it. But it was a very nice saw.
CIMG0333.JPGCIMG0314.JPGCIMG0324.JPGCIMG0323.JPG
FWW profiled Kevin Rodel's Ulmia:
https://www.finewoodworking.com/2017...iding-tablesaw
Wow, the fact that the actual table top can slide is a pretty kewel feature.
--
The most expensive tool is the one you buy "cheaply" and often...
It is a shame that American saws do not come with some of the features, and the quality, of the Ulmia.
Thank you! German engineering during the pre-CNC period really amazes me, as I explore it I see things that I would have never conjured up to complete a task and yet it makes good sense when I see it.
Thank you!
Really quick, turn the knob for the miter block and and the adjustable rod and remove the whole fence. I imagine that makes some of the masterpiece items pretty hard to find as most of those manufacturers seemed to write off the US shortly thereafter. I didn't quite understand why originally (aside from damage to their reputation) but now I see that so many of them used standard sized arbors and installed standard motors, so the manufacturers must have had significant investments in the deal. I think it's a little easier now with so many of the metric motors being available for 60hz and so many US consumers buying metric saw blades and other equipment.
Interestingly, the saw came with another arbor (20mm) so I can use 5/8" saw plates or 20mm. I'm planning to buy groovers for it so that I can cut out kumiko in a much more painless fashion than I had been previously. I had a shoji job earlier in the quarter and decided to cut out another couple shoji for another project and was pulling my hair out trying to manufacture the kumiko....ultimately that lead to this and the Omga.
Thank you! I think those were added after the fact, and I'm debating wether to do that with all of the panels on the machine and also replace these with smaller diameter, thicker and black oxide coated washers.
Nice machine! I could see where these would be a really nice saw for picture framers. The utility seems to be that you can set the stops for the legs of the frame and trim to size, rather than to measure twice.
I saw that video, thanks for posting it up here too. He has an extension that I like for longer work and his has a mortiser.
Bumbling forward into the unknown.
There are all kinds of used Ulmia table saw variants available in Germany: https://www.machineseeker.com/mss/ulmia+1710
John
When this saw arrived, along with cane two blades from Leitz which are an 80T crosscut, a 25T combination blade, a Stehle 100T crosscut and a Freud with the wrong arbor size.
Ends up, all of them are bested by a Tenryuu miter pro plus 60T in crosscutting.
Wgich brings up a thought of what do you guys prefer for combination blades in a 10” size?
Bumbling forward into the unknown.
Everlast.
Extra characters
Thank you!
Bumbling forward into the unknown.