Hi all, we are starting a new house build and have 4 rough cut cedar columns that are 12" x 12" x 6 ft, The intent is to install lights on them. The electric service will come from the ground. The light fixture will be located 4 ft from bottom of beam. Does anyone have suggestions of how to bore a hole 48"? Going from the top is not an option.
One of my thoughts was to split the beam, route out a 1" groove in the middle, then glue and clamp back together.
Any other thoughts or suggestions?
Ashampoo_Snap_Tuesday, March 19, 2019_19h31m38s_009_.jpg