Quote Originally Posted by Jeff Wittrock View Post
Added the table. Still need to make the blade slot and cutout for lower blade guide and insert.
Trunions work smoothly and lock well, but I will probably add an additional hard stop and lock for the 90 degree position.

I haven't decided what to use for the table surface. I don't think the bare plywood would hold up very well. I have considered Formica, but am leaning towards stainless steel counter top material if I can find it cheap. If not I may use mild steel to keep the cost down but having to keep the rust off would be a bummer. I have also considered using replaceable hardboard.
Don't know if this is possible in your area. . . but if you have a local scrapyard you may be able to pick up either a sheet of aluminum or a piece of stainless to use for the table surface. I regularly stop at our local one for stuff like this and it seems like they always have what I need at really good prices.