Used up a couple pieces of leftover Pine from the Chester Drawers build....Boss has been wanting a shelf to go above the Kitchen sink. Had a 1 x 8 and a 1 x 6.....
sink shelf 1.JPG
The 1 x 6 was cut into a couple legs...curves added, and a notch for the back splash...
sink shelf, corner details.JPG
Shelf will get painted, by the Boss....so nothing fancy. Notched the 1 x 8 to fit around the window sill, 3 countersunk screws, and a bead of glue on the 1 x6.
And that may do it for my Build-along posts. They involve so much time and effort, not just the building of the projects, but taking the time for the camera work, making the photos not only tell the story, but making sure they look good, and fit this site. Sometimes, that involves half of the Projects build time, if not more....
Been fun....