Just old knotty pine...and some 1/4" Luann plywood panels...nutting fahncy..
finish is on 1.JPGfinish is on 2.JPGfinish is on 3.JPG
Unless you count the brushed nickel drawer handles...stands about 43" tall, 18" deep, 26" wide...
Corner posts were 2 x 4s cut down to 4/4 x 3" then a few other cuts were made. Top two drawers used 1 x 6 boards ( #3 Pine) the others used 1 x8s
Someday, I might get the hang of dovetailing drawers..
PIP, drawer details.JPG
Since I do not have a router jig to do these with...