I made my fence removable on my SCMS, because the outfeed table doubles as my downdraft table. It is a piece of 1x2 aluminum rectangular tubing with the Kreg track and flip stop. I do like it. I do most of my cross cutting on the set up, so I like the precision and repeatability.

If you go with a fixed or removable fence, make easy to align the fence and saw together. I need to change that on my set up. I am going to make it so I can move the saw forward and backward and rotate it easier to accommodate seasonal movement in the cabinet. Right now it only adjusts easily up and down.



IMG_6224.jpg IMG_6225.jpg IMG_6226.jpg