Originally Posted by
dennis thompson
So after I pressed the chuck back on it was fine for a few days but eventually fell off again. I decided I'd just buy a new drill press. Before I went for the new drill press I put some epoxy on the old chuck and stuck it on, never expecting it to hold. I went and got the new drill press and when I got home I tried the old epoxied drill press again and it worked fine. I kept the new press in the box for a while fully expecting the chuck to fall off but it didn't so I returned the new drill press
And apparently you don't believe what you were told.
Bare metal, and press it on hard. No epoxy.
Good luck.
Never, under any circumstances, consume a laxative and sleeping pill, on the same night