Hey guys, this is my first post but I've been reading the forum for quite a while. I've also read all the flooring posts I could find but I still want some advice/opinions... I have a customer who wants me to make her 550 sq ft of qswo flooring. Not sure if I want to tackle it. I have a lot of recently felled large diameter logs so i should be able to get all 5-8" boards, which means less number of boards to handle. I have a 5hp shaper with tongue and groove cutters, jointer and large planer. Everything would be edged on an edger. My main questions are: should I even consider this? if so, how much should I mill to account for all the waste of drying and edging? Thanks in advance