I was inspired by the table Derek built a couple months ago and wanted to build something with rounded corners. I picked out some nice cypress for the project. This is truly a pleasure to work with. It is quite soft but does not chip and can be tooled easily and gets a very nice sheen when planed. It is also available in 12" widths at a reasonable price in North Carolina. I decided on a small cabinet about 12x18x10, with three drawers. Carcase construction is full blind dovetails with 1/4" inset to allow for rounding the corners.
IMG_0236.jpgIMG_0237.jpgIMG_0238.jpg
Pulls are walnut turned on the lathe and set with a wedged tenon in the drawer fronts.
IMG_0239.jpg