I picked up some black walnut from a farmer near me
IMG_0214.jpg
and found a piece that looked like a great table top.
IMG_0240.jpg
I got to play with some bow ties in hard maple to stabilize the crack.
After some pondering on design choices I came up with...
IMG_0253.jpgIMG_0249.jpgIMG_0250.jpgIMG_0251.jpg
Housed mortise and tenon for the leg to top joint and the stretcher. Pop out the wedges and the whole things knocks down and can be shipped. Finished with three coats of poly. If you look at the first picture of the completed table you can can see a reflection of the tool cabinet on the bottom of the table.