I have a program from Paul Rowntree for a standing wave texture for a panel. I am interested in making one in 4X8 MDF to hang on the wall. I was wondering if anyone else has used this and have experience with it. Looking at vcarve estimated time using a .5" vbit, it is showing 30 hours. I understand that I dont have vcarve pro set up with my machine to be adjusted to actual cutting times for me but 30 hours seems pretty extreme. I was hoping someone on here has used it and find out what kind of feed rate that they used and average time to do a 4X8 sheet.
Vectric has a texturing gadget that does something similar but it is for versions newer than what I currently have and I wasn't ready to upgrade yet.
For those not familiar with it, I am trying to get a similar effect to this and the standing wave file will allow the use of a vbit or a ballnose bit.
207HD-cover.jpg