Still helping my son with his new house. He is moved in and we are working on the basement, about 1300 sf of improvement, 3 "bedrooms", a bar, and two larger rec rooms. Building it all with metal channels/studs, our first time using them. Framing is about done, now starts the electrical (yes he pulled permits). The issue is that the top of the lower punchouts for the outlets are about 14" above the floor and the bottom of the boxes are at 15" to match the rest of the house. So there is no room to fasten the wire to the stud as required. I really don't want to drill new holes in every stud with a box or move the boxes up 6". I have my grommets ready and have both plastic standoffs and zip ties with the hole for the screw to fasten the wire to the stud within 8" as required by code (plastic boxes). Anyone sparkies out there with experience?