Results 1 to 3 of 3

Thread: Simple finger joint jig

  1. #1
    Join Date
    Feb 2019
    San Diego, CA

    Simple finger joint jig

    I made a really simple finger joint jig this weekend for use in making boxes or drawers. It don't have a dado set so I am currently limited to pins that are as wide as the kerf on my table saw blade. The jig consists of a single board clamped to my crosscut sled with a protruding sliver of wood the same thickness as the blade kerf. Once the jig is made there's a bit of adjustment to get it just right. I can't wait to use it on a project.

    Here's the video I used as reference to make the jig:

    Attached Images Attached Images

  2. #2
    Join Date
    Apr 2010
    Berkshire County in Western Ma
    I made my first jointed beehive boxes that way. It worked well once I got it set correctly

  3. #3
    If I could have seen that vid nearly 50 years ago rather than gathering information from a magazine it would have saved me a lot of time.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts