I made a really simple finger joint jig this weekend for use in making boxes or drawers. It don't have a dado set so I am currently limited to pins that are as wide as the kerf on my table saw blade. The jig consists of a single board clamped to my crosscut sled with a protruding sliver of wood the same thickness as the blade kerf. Once the jig is made there's a bit of adjustment to get it just right. I can't wait to use it on a project.
Here's the video I used as reference to make the jig: https://www.youtube.com/watch?v=nYlA0CRDn3k
20190210_112142.jpg