Okay, I feel dumb. Maybe I'm not, but maybe I am. I don't know.
My Unisaw switch is starting to fail. I bought a replacement Powertec Paddle switch (I run 220v). I am confused because my Unisaw uses a 1NO1NC switch (SPDT) and I think this Powertec switch is something different? I think this switch is intended for a situation when power comes from the wall, to the switch, to the motor. My Unisaw is more complicated. Power goes into the machine, into a control box, I get a few wires out that go to a switch. I measured the power on these a long time ago and they low current, low voltage (if memory serves me).
So I go online to look for 1NO1NC switches and I am not coming across a lot of options (especially on Amazon) and it has me doubting myself.
Is there a way to wire the Powertec Paddle switch with 3 wires that I'm not getting? It looks like I'm going to have to go thru Grainger, etc to get an actual (not Chinese dillywacker thing) switch.
Confused in Utah,