I’m planning a workshop makeover, starting with my saw, jointer and planer. I currently have a 3hp Jet cabinet saw with a Jessem slider, 6” Jet jointer and 15” Delta planer.
For the saw, I’m torn between a Felder KF 700SP and MiniMax ST 4E.
For the jointer/planer I have a similar struggle between the Felder AD 941 and MiniMax FS 41E.
I’ve got quotes for both For roughly the same amount delivered. I think I’m getting more for my money on Felder, but have added tooling cost since everything is proprietary and I would need a phase converter.
Looking for some advice
- jump on one or the other?
- re-evaluate if I need to spend that much?
- point me in a different direction?
Thanks,
Toby