IMG_0282.JPGI have spun my number 2 Morse taper in my headstock, probably was dirty. The 4 prong drive has some rings on it. Now the taper has mirrored the marks on another drive. Can I clean the marks up with a wheel cylinder hone? If it will fit?
[OP]
Contributor
IMG_0282.JPGI have spun my number 2 Morse taper in my headstock, probably was dirty. The 4 prong drive has some rings on it. Now the taper has mirrored the marks on another drive. Can I clean the marks up with a wheel cylinder hone? If it will fit?
Last edited by Roger Davis TN; 02-06-2019 at 2:18 AM.
Posting Permissions
Reply With Quote