Page 3 of 3 FirstFirst 123
Results 31 to 32 of 32

Thread: spindle wrench

  1. #31
    Join Date
    Apr 2016
    Location
    Asheboro,NC
    Posts
    129
    I use an adjustable wrench (cresent wrench style ). inexpensive wrench from HF. Works every time, don't over engineer it.

  2. #32
    Join Date
    Jan 2013
    Location
    sykesville, maryland
    Posts
    279
    Quote Originally Posted by Jay Mullins View Post
    I use an adjustable wrench (cresent wrench style ). inexpensive wrench from HF. Works every time, don't over engineer it.
    Hardly over engineering it. I would need an 18" crescent wrench. $27 for a HF one delivered to my door. I suspect it would also be too wide to fit the flat spot, because my 15" one is. The sink drain wrench, delivered to my door for $13, works perfectly. Problem solved with no engineering needed.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •