Hi All - I'm working to finalize a walnut table design based on this picture. I found a great source on etsy for the legs which will be 5" square. The table top will be about 106" long and 44" wide and at i'm aiming for 2.25" thick.
I'm getting a bit stuck on the rails or apron that connect to the legs and provides support for the table top. They will be 3.5" high (wide) and about 74" long. What thickness should i shoot for here - 1", 1.5", 2"? Even at that length the table is going to be pretty solid - so this is some extra support as well as for design purposes.
Welcome thoughts and suggestions...
prod2710574_E24959556_F.jpg