Hi
New guy here so I hope i am doing this correctly. My wife and i ran across a 6 sided multi level with pie shape drawers wooden (antique) cabinet that she thought would be a nice addition to her sewing room for her small sundries. Of Course I said "I can Build That". So the challenge was given by her and accepted by me! I Have most tools know to man (old and new) but some times the hardest part of a project is the design phase. Does anyone know where I can put my hands on a set of plans to help me start making some saw dust and noise in my shop. I have tons of material for construction, cherry, maple,ash and beech rough and dimensioned lumber for the basic carcass and would probably use veneer plywood for the drawer boxes. I just need to get some sort of drawings/instructions on the actual construction so I can modify them to our needs. I have experience building cabinets, face frame style with 3/4 veneer plywood boxes. My shop has all tools needed to dimension, rout, shape and panel sand anything I want. Matter of fact my latest additions are Festool track saw system as well as a saw stop PCS to replace my dinosaur Delta 12/14 inch monster table saw. Any help would be appreciated.
Gary from the Cooperstown New York region