Hi,
I'd appreciate any advice from a Hammer A3-31 owner (i.e Rod Sheridan) on what adjustment I need to make to eliminate the snipe I am experience with the planer function. The snipe is happening at the trailing end of the board only, slightly more on the operator side compared to the hinge side.
It's not a significant amount of snipe, but I know the machine is capable of delivering zero snipe, so I assume I need to make an adjustment to accomplish this, probably to the feed rollers. The literature that came with the machine doesn't have much information on how to make the adjustment which is why I'm asking here.
I've kept the bed waxed, and I am being careful to tighten the clamping lever once the planing height has been set.
Thanks for any guidance,
Edwin